ISABER Lightsaber Covertec Wheel — CNC Aluminum Belt Clip Button
Your saber belongs on your belt. Not in your hand all day. Not leaning against a table. On your belt, where you can grab it.
The ISABER Covertec Wheel is a CNC-machined aluminum button that screws into your hilt. Click it into any standard covertec belt clip and your saber hangs securely at your hip — hands-free, ready to draw. Available in Silver, Gray, and Black.
This is the wheel only (the hilt-mounted button). The belt clip is sold separately — any standard covertec clip works. You’re not locked into one ecosystem.
What Are the Specifications?
| Specification | Details |
|---|---|
| Product Type | Covertec wheel (hilt-mounted button) |
| Material | CNC-machined aluminum |
| Color Options | Silver, Gray, Black |
| Weight | ~5–10 g |
| Compatibility | Standard 1-inch saber hilts with threaded section connections |
| Belt Clip Compatibility | Any standard covertec belt clip (sold separately) |
| Installation | Screw-in between hilt sections, no tools required |
| Thread Type | Standard covertec thread pitch |
Installation: 30 Seconds, No Tools
The covertec wheel installs at a threaded connection point on your hilt:
- Unscrew the hilt at any threaded section joint.
- Place the covertec wheel over the exposed stud.
- Re-tighten the hilt section. The wheel sits in the gap with the button facing outward.
That’s it. No drilling. No adhesive. No permanent modification. If you want to remove it or move it to a different hilt, just unscrew and take it off.
Choosing a Color
Three finishes. Same aluminum. Pick what matches your hilt.
| Color | Best Match |
|---|---|
| Silver | Most hilts. Natural aluminum look blends with the majority of saber finishes. The default pick. |
| Gray | Darker finishes, weathered hilts, gunmetal bodies. Less contrast than Silver against dark anodizing. |
| Black | Vader, Kylo Ren, dark-side sabers. Disappears against a black hilt. Cleanest look on Sith replicas. |
When Should You Get (and Skip) the Covertec Wheel?
Get this if:
- You go to conventions. Carrying a saber in your hands all day is exhausting. A belt clip with a covertec wheel frees your hands for photos, food, and browsing vendor booths.
- Your hilt didn’t come with a covertec wheel pre-installed. Some ISABER sabers have one built in. Some don’t. Check your hilt before ordering.
- You want to move a covertec wheel between multiple hilts. The screw-in design means you can swap it in 30 seconds. One wheel, multiple sabers.
Skip this if:
- Your hilt already has a covertec wheel. Most ISABER character replicas come with one installed. Don’t buy a second unless you need a different color.
- You never wear your saber on a belt. If your saber lives on a display stand and only comes off for photos, a covertec wheel adds a small bump on the grip that you don’t need.
- Your hilt has no threaded connections. Budget toy sabers with glued-seam construction can’t accept a covertec wheel. It needs a threaded joint to mount between.
Frequently Asked Questions
Q1: Does this come with a belt clip?
A: No. This is the covertec wheel only — the button that mounts to your hilt. Any standard covertec belt clip is compatible and sold separately. You’re not locked into one brand’s clip ecosystem.
Q2: Will this fit my ISABER lightsaber?
A: It fits any hilt with standard 1-inch diameter and threaded section connections. Most ISABER sabers have at least one threaded joint where the wheel can mount. Check your hilt: if you can unscrew it into two pieces, the covertec wheel fits between them.
Q3: Is the covertec wheel metal or plastic?
A: CNC-machined aluminum. Not plastic. It won’t deform under the weight of a standard saber. The anodized finish matches the durability of your hilt.
Q4: What color should I choose?
A: Silver matches most hilts — it’s the default. Gray suits darker finishes and weathered sabers. Black disappears against Vader, Kylo Ren, and dark-side hilts. If you’re unsure, Silver blends with everything.
Q5: Will the covertec wheel affect spinning?
A: It adds a few millimeters to the hilt length at the mounting point. For basic choreography and casual spinning, you won’t notice it. For advanced, high-speed spinning where every millimeter of grip matters, it’s removable in seconds.
Q6: How do I install it?
A: Unscrew your hilt at a threaded connection. Place the covertec wheel over the exposed stud. Re-tighten. No tools. No drilling. No adhesive. The whole process takes about 30 seconds.
Q7: Will it work with non-ISABER sabers?
A: Yes. Any hilt with standard covertec-compatible threading works. The covertec standard is universal across the saber hobby. Budget toy sabers with glued construction won’t work — they lack threaded joints.
Q8: Can I install multiple covertec wheels on one hilt?
A: Technically yes, if your hilt has multiple threaded joints. But one is enough. A single covertec wheel supports the full weight of any standard saber. Two wheels don’t add security and can interfere with your grip.
Q9: How secure is the covertec system during dueling?
A: The covertec clip holds the saber securely against your body during walking, standing, and light movement. For active dueling, remove the saber from the clip first — the clip is designed for carry, not combat retention. The wheel itself stays firmly mounted to the hilt.
Reviews
There are no reviews yet.