Kylo Ren Crossguard Lightsaber — Kylo Ren Replica from ISABER
The Kylo Ren Crossguard Lightsaber from ISABER is a replica of Kylo Ren’s signature crossguard design from Star Wars: The Force Awakens and The Rise of Skywalker. The hilt features a black crossguard with two side quillions that protrude below the main blade.
Available with Xenopixel soundboard. Includes a 36-inch duel-grade polycarbonate blade, 18650 battery, USB charger, and hex wrench set in the box.
ISABER is not associated with Lucasfilm or Disney. This is a sabersmith-built replica designed for enthusiasts who want a Kylo Ren saber for dueling, cosplay, or display.
What Are the Specifications?
| Specification | Details |
|---|---|
| Character | Kylo Ren (The Force Awakens / The Rise of Skywalker) |
| Hilt | Black, crossguard design |
| Crossguard | Two side quillions — light up after main blade, retract before main blade |
| Blade Type | 3mm polycarbonate Neo blade (Xenopixel) |
| Blade Length | 36 inches (92cm) |
| Soundboard | Xenopixel |
| Sound Fonts | Over 30 pre-installed |
| Smooth Swing | Yes |
| Battery | 18650 3600mAh 3.7V (safety protected) |
| Bluetooth | Yes (XenoConfigurator app) |
| Blade Effects | Rainbow, candy, fire, unstable, crackle, and more |
| Ignition Styles | 10 styles including blaster mode |
| Blade Material | Duel-grade, shatter-resistant polycarbonate |
Soundboard Options
This Kylo Ren crossguard is available with the Xenopixel soundboard. Here is how it compares to other common options:
Xenopixel V3 — The featured option. Neopixel strip inside the blade gives smooth ignition animations, scrolling effects, and unstable blade styles. Controlled via the XenoConfigurator Bluetooth app on your phone. 30+ sound fonts, 10 ignition styles. Beginner-friendly, no programming required.
RGB Baselit — Uses a 12W RGB LED in the hilt. Bright solid colors, smooth swing, Bluetooth enabled. 30+ sound fonts. 2mm polycarbonate blade, 18650 3000mAh battery.
Proffie — Fully programmable board via Arduino IDE. The most customizable option, but requires C++ programming knowledge. 20+ sound fonts. 3mm neopixel blade, 18650 3600mAh battery.
What’s in the Box?
- Saber Hilt ×1
- Polycarbonate Blade ×1 (36 inches)
- USB Charger ×1
- Hex Wrench and Screw Set ×1
Frequently Asked Questions
Q1: Can I duel with the Kylo Ren crossguard lightsaber?
A: Yes, the blade is made from duel-grade, shatter-resistant polycarbonate. Light-to-medium sparring is fine. For heavy dueling, the baselit (RGB) version is recommended because the blade is hollow and the LED is in the hilt.
Q2: What is the difference between Xenopixel and Proffie?
A: Xenopixel is beginner-friendly and controlled via the XenoConfigurator Bluetooth app on your phone. No programming needed. Proffie is fully programmable via Arduino IDE and offers unlimited customization, but requires C++ programming knowledge. Xenopixel comes with 30+ fonts and 10 ignition styles out of the box.
Q3: How long does the battery last?
A: The 3600mAh 18650 battery gives approximately 3 hours of mixed use. Neopixel blades draw more power than baselit because the LEDs run the full length of the blade. Charging time is about 4-6 hours.
Q4: Does it have Bluetooth?
A: Yes, the Xenopixel version has Bluetooth and works with the XenoConfigurator app on your phone. You can change blade colors, effects, sound fonts, and settings wirelessly.
Q5: Can I add my own sound fonts?
A: Yes, both Xenopixel and Proffie support custom sound fonts via SD card. Simply copy font files to the SD card and select them from the menu or app.
Q6: What blade length does it come with?
A: 36 inches (92cm) — the standard length for adult dueling and cosplay.
Q7: Can I change the blade color?
A: Yes. Xenopixel supports infinite color changing. Blade effects include rainbow, candy, fire, unstable, crackle, and more.
Q8: What is the crossguard for?
A: The two side quillions provide hand protection during combat by blocking blade slides. They light up independently with their own LEDs — they fire after the main blade and retract before it, matching the movie behavior.
Q9: Is this an officially licensed product?
A: No. ISABER is not associated with Lucasfilm or Disney. This is a sabersmith-built replica for enthusiasts.
Q10: Does it support smooth swing?
A: Yes, all versions (RGB, Xenopixel, Proffie) have sensitive motion sensors for smooth swing sound modulation.
Pricing & Availability
Price: $409.00 USD (on sale from $529.00)
Free shipping worldwide on orders over $75. Ships within 1-3 business days.
Reviews
There are no reviews yet.